Soap Making From Scratch
Soap Making From Scratch. In a separate vessel, heat 60oz water till hot but not boiling. First, weigh the coconut oil in a bowl or jug and melt it in the microwave.
Always pour the lye in the water beaker while mixing. It will harden during cure. Add this mixture into the slow cooker.
The quickest way to make soap from scratch is by using the hot process method.
Once everything is completely cleaned up, it’s safe to remove your gloves and goggles. After the mixture reaches trace, add fragrance, color, and additives, then pour it into a mold. That means that the next step after mixing the lye solution is to melt the solid oils.
First, weigh the coconut oil in a bowl or jug and melt it in the microwave.
You need to dissolve the lye in water first because lye is not soluble in oil. Leave this mixture on low heat for a few hours and return to it. If using a microwave, place the base in.
Alternatively, melt in a pot on the stove on low heat.
After 72 hours, your homemade milk soap is ready to unmold. Add the vegetable glycerin into this water and mix, this will dissolve the soap later on. Melt the solid oils in the soap recipe.
Pour melted soap base into a mold and spritz lightly with rubbing alcohol.
Always pour the lye in the water beaker while mixing. Buy all your soapmaking supplies here: Add this mixture into the slow cooker.
If you’re ready, let’s get started!
Using a stick blender (also called immersion blender), blend the soap in short bursts of a few seconds at a time, stirring by hand with the motor off in between times. Stir in your herbs, color, fragrance, etc. Place the soap base pieces into a pot and warm over low heat until melted.
0 Response to "Soap Making From Scratch"
Post a Comment